Products

The disc diffuser adopts ABS engineering plastics as the main body and is covered with a special rubber EPDM or silicone microporous membrane.

The design of the membrane sleeve prohibits clogging of the aeration pores which are self closing when air flow/pressure is interrupted. Installed with clamp saddle, most existing diffused air...

Multi-layer cutting is carried out to cut the bubbles into micro-bubbles, which greatly improves the utilization rate of oxygen, and has the features of uniform air distribution and high oxygen...

These bubbles spread rapidly with the water flow, which provide high efficiency mixing and aerating to the processing water.

LK-FQB Floater Aerator is to use double air intake pipes to fix the aerator to the floating ring and to hang it in the water.

It is widely used in aquaculture aeration, sewage treatment aeration, cement conveying, gas conveying and pressurizing systems on low-pressure occasions.

It is mainly composed of 6 parts: motor, air transition, air chamber , base (oil tank), and oil drip nozzle.

It is intergrating with chemical mixing, sludge thickening & dewatering filtrate collation and aotomatic operation panel.

LK-XY Filter Press is an elaborately designed sludge-dewatering machine.

The process of dewatering is achieved by passing a pair of filtering cloths and belt through a system of rollers, the system takes sludge or slurry as a feeding, and separates it into a filtrate...

The quantitative chemical is placed in stirring solution tank for stirring and dissolving. After full dissolution, the chemical will be pump to certain working point by the metering pump, and the...

The electrolyzing and NaCLO dosing occurs simultaneously,the oxidability and disinfection are same as the CL compound.