Water Softener
The general process used by the Water Softener- iron and manganese removal device is: iron and manganese water---aeration---natural manganese sand filtration, removal by catalytic oxidation and ion exchange, etc.
Description
LK-MMF Mechanical Filter-Water Softener
Overview
| Due to the need for aeration, the traditional method requires more energy consumption Our high-efficiency iron and manganese removal filter is a new type of mechnical filter with special filter media which no require aeration and directly oxidize Fe2+,Mn2+ plasma in groundwater and the effluent turbidity can reach below 3 degrees.The general process used by the Water Softener- iron and manganese removal device is: iron and manganese water---aeration---natural manganese sand filtration, removal by catalytic oxidation and ion exchange, etc. |  |
Parameters
Filtration speed | 7~15m/h |
Influent turbidity | <15mg/L |
Turbidity of effluent | <5mg/L |
Inlet water PH | 6~9 |
Working temperature | Room temperature |
Working pressure | <04MPa |
Filter layer height | 800-1200mm |
Backwash compressed air volume | 18-25L/m2s |
Compressed air pressure | 1-2Kq/cm2 |
Backwash intensity | 15L/m2s (single screen) |
Backwash time | 5-10 minutes |
Features
●Low cost, low operating cost; |
●Easy to Maintenance,filter media can be reused after backwashing; |
●Good filtering performance with smaller footprint; |
|
Send Inquiry
You Might Also Like
