Multi-media Filter
The inlet water turbidity is required to be less than 20 degrees, and the effluent turbidity can reach below 3 degrees.
Description
LK-MMF Mechanical Filter-Multi-Media Filter
Overview
LK-Multi-Media Filter is widely used as water pretreatment process to turbidity removing system , reverse osmosis system , ion exchange softening and desalination system , surface water and groundwater desilting filter material is refined quartz sand and anthracite, etc. The inlet water turbidity is required to be less than 20 degrees, and the effluent turbidity can reach below 3 degrees. |  |
Parameters
Filtration speed | 7~15m/h |
Influent turbidity | <15mg/L |
Turbidity of effluent | <5mg/L |
Inlet water PH | 6~9 |
Working temperature | Room temperature |
Working pressure | <04MPa |
Filter layer height | 800-1200mm |
Backwash compressed air volume | 18-25L/m2s |
Compressed air pressure | 1-2Kq/cm2 |
Backwash intensity | 15L/m2s (single screen) |
Backwash time | 5-10 minutes |
Features
●Low cost, low operating cost; |
●Easy to Maintenance,filter media can be reused after backwashing; |
●Good filtering performance with smaller footprint; |
|
Send Inquiry
You Might Also Like
