What are the common problems of Submersible Mixer

1,Liquid level is too low

Submersible mixer liquid level is too low, submersible mixer can not run at full load, easy to cause excessive pushing and stirring, affecting the actual function of the mixer, long-term no-load operation will also cause damage to the motor of the mixer. The reason for the low liquid level of the submersible mixer: the liquid level controller is damaged and fails, and it should be adjusted and replaced in time.

2,Motor running without item

Submersible mixer motor after the lack of phase phenomenon:

The vibration increases, there is abnormal sound, the temperature increases, the speed decreases, the current increases, and the strong buzz can not be started when starting. Easy to burn the motor.

Causes of motor phase loss operation are:

① Improper selection of fuses or pressing is not good, so that the fuse is broken.

② The contact of the switch contact is not in good contact.

③ The wire connector is loose or a wire is broken.

④ One phase winding is open.

3,Excessive power consumption

1) The liquid density is too large, check and reduce the liquid density

2) The inside of the mixer is damaged, replace it with a new mixer

3), motor reversal, need to adjust the line in time

4), insufficient voltage, check and restore normal voltage

5), the motor side radial bearing is damaged, replace the new bearing