Home - Knowledge - Details

RO water treatment system for the treatment of circulating wastewater in power plants

The circulating cooling water system of the power plant consumes a lot of water, accounting for 80% of the water used in the pure thermal power plant and more than 50% of the water used in the thermal power plant. It can not only prevent environmental pollution, but also effectively save water resources and reduce production costs.

Beijing Jingfeng Natural Gas Gas Turbine Combined Cycle Power Plant adopts the combined operation of ultrafiltration + RO technology to treat the circulating sewage of the power plant. Since it was put into operation, the RO system has been running well, the water production is 68m3·h-1, and the conductivity is less than 35μS·cm-1 , the desalination rate is higher than 97%. The desalination station of the power plant of Handan Iron and Steel Group Co., Ltd. also adopts the double-membrane water treatment process. The refined desalinated water after ultrafiltration + secondary RO + mixed bed treatment can be used for power plant boilers and dry quenching. The daily output of refined desalinated water is 15,000t. In addition, Guo Qing [39] conducted a field test on the ultrafiltration-RO combined process in Linyi Power Generation Co., Ltd. to treat circulating cooling sewage. The operating pressure of each stage of the RO system was stable, and the produced water met the requirements for reuse. Chen Yingmin used continuous microfiltration + RO technology to pre-desalt the circulating sewage, and the desalination rate of the RO system was over 98%.


Send Inquiry

You Might Also Like